PRACTICE LAYING A BEAD ON A PIECE OF SCRAP PAPER FIRST follow instructions on bottle the trick is to allow a bead to hang out of the bottle about a half inch and guide it around the pencil mark maintaining a light but steady pressure,as you come to the end of the line reduce pressure so as not to leave a blob at the end, DON'T TRY TO BE PERFECT, THE TWO SIDES DON'T HAVE TO BE A PERFECT MATCH,YOU WILL NEVER NOTICE IT IN A FINISHED MASK. If it is hot and humid the bead may not work well,it will spread and sag.If this happens wipe it off let it dry ,repaint that area and try again in an air conditioned room,also don't apply over a varnish or enamel as it will slide all over the place,a flat acrylic paint is best. KEEP THE BOTTLE UPSIDE DOWN IN BETWEEN APPLICATIONS TO AVOID BUBBLES WHICH WILL BREAK THE BEAD WHILE YOU ARE APPLYING IT, AND KEEP TIP ORIFACE CLEAN FOR BEST RESULTS.
Posted by Hello